[解決済み】カスタム.NET Exceptionをシリアライズ可能にする正しい方法は何ですか？

質問

具体的には、例外にカスタムオブジェクトが含まれていて、そのオブジェクト自体がシリアライズ可能であるかどうかがわからない場合です。

この例を見てみましょう。

public class MyException : Exception
{
    private readonly string resourceName;
    private readonly IList<string> validationErrors;

    public MyException(string resourceName, IList<string> validationErrors)
    {
        this.resourceName = resourceName;
        this.validationErrors = validationErrors;
    }

    public string ResourceName
    {
        get { return this.resourceName; }
    }

    public IList<string> ValidationErrors
    {
        get { return this.validationErrors; }
    }
}

このExceptionがシリアライズ、デシリアライズされた場合、2つのカスタムプロパティ( ResourceName と ValidationErrors ) は保存されません。プロパティは null .

カスタム例外のシリアライズを実装するための共通のコードパターンはありますか？

どのように解決するのですか？

カスタムプロパティなしの基本実装

SerializableExceptionWithoutCustomProperties.cs。

namespace SerializableExceptions
{
    using System;
    using System.Runtime.Serialization;

    [Serializable]
    // Important: This attribute is NOT inherited from Exception, and MUST be specified 
    // otherwise serialization will fail with a SerializationException stating that
    // "Type X in Assembly Y is not marked as serializable."
    public class SerializableExceptionWithoutCustomProperties : Exception
    {
        public SerializableExceptionWithoutCustomProperties()
        {
        }

        public SerializableExceptionWithoutCustomProperties(string message) 
            : base(message)
        {
        }

        public SerializableExceptionWithoutCustomProperties(string message, Exception innerException) 
            : base(message, innerException)
        {
        }

        // Without this constructor, deserialization will fail
        protected SerializableExceptionWithoutCustomProperties(SerializationInfo info, StreamingContext context) 
            : base(info, context)
        {
        }
    }
}

カスタムプロパティを含む完全な実装

カスタムシリアライザブル例外の完全な実装 ( MySerializableException ) と、その派生である sealed 例外( MyDerivedSerializableException ).

今回の実装の要点をまとめると、以下のようになります。

1. あなた は、それぞれの派生クラスに対して [Serializable] 属性 - この属性は基底クラスから継承されないので、指定しない場合はシリアライズに失敗して SerializationException という記載があります。 アセンブリYのタイプXはシリアライザブルとしてマークされていません。
2. あなた カスタムシリアライゼーションを実装する必要があります。 . その [Serializable] 属性だけでは十分ではありません。 Exception 実装 ISerializable ということは、派生クラスもカスタムシリアライズを実装しなければなりません。これには2つのステップがあります。
   1. シリアライズコンストラクタを用意する . このコンストラクタは private もしあなたのクラスが sealed であるべきで、そうでなければ protected で、派生クラスへのアクセスを許可します。
   2. GetObjectData() をオーバーライドする。 を呼び出し、必ず base.GetObjectData(info, context) で、ベースクラスが自分自身の状態を保存するようにします。

SerializableExceptionWithCustomProperties.cs。

namespace SerializableExceptions
{
    using System;
    using System.Collections.Generic;
    using System.Runtime.Serialization;
    using System.Security.Permissions;

    [Serializable]
    // Important: This attribute is NOT inherited from Exception, and MUST be specified 
    // otherwise serialization will fail with a SerializationException stating that
    // "Type X in Assembly Y is not marked as serializable."
    public class SerializableExceptionWithCustomProperties : Exception
    {
        private readonly string resourceName;
        private readonly IList<string> validationErrors;

        public SerializableExceptionWithCustomProperties()
        {
        }

        public SerializableExceptionWithCustomProperties(string message) 
            : base(message)
        {
        }

        public SerializableExceptionWithCustomProperties(string message, Exception innerException)
            : base(message, innerException)
        {
        }

        public SerializableExceptionWithCustomProperties(string message, string resourceName, IList<string> validationErrors)
            : base(message)
        {
            this.resourceName = resourceName;
            this.validationErrors = validationErrors;
        }

        public SerializableExceptionWithCustomProperties(string message, string resourceName, IList<string> validationErrors, Exception innerException)
            : base(message, innerException)
        {
            this.resourceName = resourceName;
            this.validationErrors = validationErrors;
        }

        [SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
        // Constructor should be protected for unsealed classes, private for sealed classes.
        // (The Serializer invokes this constructor through reflection, so it can be private)
        protected SerializableExceptionWithCustomProperties(SerializationInfo info, StreamingContext context)
            : base(info, context)
        {
            this.resourceName = info.GetString("ResourceName");
            this.validationErrors = (IList<string>)info.GetValue("ValidationErrors", typeof(IList<string>));
        }

        public string ResourceName
        {
            get { return this.resourceName; }
        }

        public IList<string> ValidationErrors
        {
            get { return this.validationErrors; }
        }

        [SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
        public override void GetObjectData(SerializationInfo info, StreamingContext context)
        {
            if (info == null)
            {
                throw new ArgumentNullException("info");
            }

            info.AddValue("ResourceName", this.ResourceName);

            // Note: if "List<T>" isn't serializable you may need to work out another
            //       method of adding your list, this is just for show...
            info.AddValue("ValidationErrors", this.ValidationErrors, typeof(IList<string>));

            // MUST call through to the base class to let it save its own state
            base.GetObjectData(info, context);
        }
    }
}

DerivedSerializableExceptionWithAdditionalCustomProperties.cs。

namespace SerializableExceptions
{
    using System;
    using System.Collections.Generic;
    using System.Runtime.Serialization;
    using System.Security.Permissions;

    [Serializable]
    public sealed class DerivedSerializableExceptionWithAdditionalCustomProperty : SerializableExceptionWithCustomProperties
    {
        private readonly string username;

        public DerivedSerializableExceptionWithAdditionalCustomProperty()
        {
        }

        public DerivedSerializableExceptionWithAdditionalCustomProperty(string message)
            : base(message)
        {
        }

        public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, Exception innerException) 
            : base(message, innerException)
        {
        }

        public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, string username, string resourceName, IList<string> validationErrors) 
            : base(message, resourceName, validationErrors)
        {
            this.username = username;
        }

        public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, string username, string resourceName, IList<string> validationErrors, Exception innerException) 
            : base(message, resourceName, validationErrors, innerException)
        {
            this.username = username;
        }

        [SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
        // Serialization constructor is private, as this class is sealed
        private DerivedSerializableExceptionWithAdditionalCustomProperty(SerializationInfo info, StreamingContext context)
            : base(info, context)
        {
            this.username = info.GetString("Username");
        }

        public string Username
        {
            get { return this.username; }
        }

        public override void GetObjectData(SerializationInfo info, StreamingContext context)
        {
            if (info == null)
            {
                throw new ArgumentNullException("info");
            }
            info.AddValue("Username", this.username);
            base.GetObjectData(info, context);
        }
    }
}

単体テスト

上記で定義された 3 つの例外タイプに対する MSTest ユニットテスト。

UnitTests.cs。

namespace SerializableExceptions
{
    using System;
    using System.Collections.Generic;
    using System.IO;
    using System.Runtime.Serialization.Formatters.Binary;
    using Microsoft.VisualStudio.TestTools.UnitTesting;

    [TestClass]
    public class UnitTests
    {
        private const string Message = "The widget has unavoidably blooped out.";
        private const string ResourceName = "Resource-A";
        private const string ValidationError1 = "You forgot to set the whizz bang flag.";
        private const string ValidationError2 = "Wally cannot operate in zero gravity.";
        private readonly List<string> validationErrors = new List<string>();
        private const string Username = "Barry";

        public UnitTests()
        {
            validationErrors.Add(ValidationError1);
            validationErrors.Add(ValidationError2);
        }

        [TestMethod]
        public void TestSerializableExceptionWithoutCustomProperties()
        {
            Exception ex =
                new SerializableExceptionWithoutCustomProperties(
                    "Message", new Exception("Inner exception."));

            // Save the full ToString() value, including the exception message and stack trace.
            string exceptionToString = ex.ToString();

            // Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
            BinaryFormatter bf = new BinaryFormatter();
            using (MemoryStream ms = new MemoryStream())
            {
                // "Save" object state
                bf.Serialize(ms, ex);

                // Re-use the same stream for de-serialization
                ms.Seek(0, 0);

                // Replace the original exception with de-serialized one
                ex = (SerializableExceptionWithoutCustomProperties)bf.Deserialize(ms);
            }

            // Double-check that the exception message and stack trace (owned by the base Exception) are preserved
            Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
        }

        [TestMethod]
        public void TestSerializableExceptionWithCustomProperties()
        {
            SerializableExceptionWithCustomProperties ex = 
                new SerializableExceptionWithCustomProperties(Message, ResourceName, validationErrors);

            // Sanity check: Make sure custom properties are set before serialization
            Assert.AreEqual(Message, ex.Message, "Message");
            Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
            Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
            Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
            Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");

            // Save the full ToString() value, including the exception message and stack trace.
            string exceptionToString = ex.ToString();

            // Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
            BinaryFormatter bf = new BinaryFormatter();
            using (MemoryStream ms = new MemoryStream())
            {
                // "Save" object state
                bf.Serialize(ms, ex);

                // Re-use the same stream for de-serialization
                ms.Seek(0, 0);

                // Replace the original exception with de-serialized one
                ex = (SerializableExceptionWithCustomProperties)bf.Deserialize(ms);
            }

            // Make sure custom properties are preserved after serialization
            Assert.AreEqual(Message, ex.Message, "Message");
            Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
            Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
            Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
            Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");

            // Double-check that the exception message and stack trace (owned by the base Exception) are preserved
            Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
        }

        [TestMethod]
        public void TestDerivedSerializableExceptionWithAdditionalCustomProperty()
        {
            DerivedSerializableExceptionWithAdditionalCustomProperty ex = 
                new DerivedSerializableExceptionWithAdditionalCustomProperty(Message, Username, ResourceName, validationErrors);

            // Sanity check: Make sure custom properties are set before serialization
            Assert.AreEqual(Message, ex.Message, "Message");
            Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
            Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
            Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
            Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
            Assert.AreEqual(Username, ex.Username);

            // Save the full ToString() value, including the exception message and stack trace.
            string exceptionToString = ex.ToString();

            // Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
            BinaryFormatter bf = new BinaryFormatter();
            using (MemoryStream ms = new MemoryStream())
            {
                // "Save" object state
                bf.Serialize(ms, ex);

                // Re-use the same stream for de-serialization
                ms.Seek(0, 0);

                // Replace the original exception with de-serialized one
                ex = (DerivedSerializableExceptionWithAdditionalCustomProperty)bf.Deserialize(ms);
            }

            // Make sure custom properties are preserved after serialization
            Assert.AreEqual(Message, ex.Message, "Message");
            Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
            Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
            Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
            Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
            Assert.AreEqual(Username, ex.Username);

            // Double-check that the exception message and stack trace (owned by the base Exception) are preserved
            Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
        }
    }
}